Score: 4.1/5 (70 votes)
When Should You Sharpen Your Chainsaw Chain? A general rule of thumb is to sharpen your chain when you notice it is not cutting as well as before. Another way is to look at the sawdust if you see small chunks it is an indication that the chains are getting dull. Large chunks indicate a sharp chain.
How do you know when your chainsaw needs sharpening?
?Here's telltale sign that your chainsaw needs sharpening. Examine the wood being expelled by the saw. A sharp chainsaw sprays out thin shavings. A dull saw spews out fine wood dust.
How long should a chainsaw chain last before sharpening?
Chainsaw durability differs from one item to another, although all the tools become dull over time. However, most top-quality chains can last up to 5 years of extensive use, or up to a decade when used occasionally. Additionally, these tools durability is highly dependent on maintenance.
Why does my chainsaw chain dull so quickly?
You may be putting to steep of an angle on the cutters, which will dull quickly. You're rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.
Is it worth it to sharpen a chainsaw chain?
Keep the oil flowing too to keep from overheating the chain. A hot, unlubricated chain will wear out quicker and drastically shorten its life. Well worth it to sharpen your chains yourself.
Is it cheaper to make your own chainsaw chain?
It is cheaper in the long run to make your own. Bonus is that you can make chain for others at a slight markup.
How much does it cost to sharpen chainsaw chain?
A 16" chain costs anywhere from $13-20. Pay $4-7 per chain to sharpen, and that's up to 50% of the cost of a new chain!
Is it OK to use a chainsaw on wet wood?
Does this pose any risk to your chainsaw? In all honesty, no! The additional moisture found on wet wood will not make any difference to the cutting process. It doesn't place any additional resistance on the chainsaw, and no additional effort is required to cut through it.
How do you clean a chainsaw chain before sharpening it?
We soak them for an hour, or overnight in Lye (drain cleaner), purchased in a can, dry powder form at a hardware store. Next, we scrub the chain on a flat surface with hot water, dish soap and a coarse brush. Rinse, pat dry, and sharpen the cutters.
Does hard wood dull a chainsaw?
Re: Chainsaw and oak
Your chains will need to be sharp and they will become dull faster cutting dead and dry hardwoods.
How long should a chain last on a chainsaw?
The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer. The chainsaw can concede unexpected damage out of nowhere which can lower its possibility to work efficiently.
What is the best angle to sharpen a chainsaw chain?
Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it's best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log.
Do you need to clean a chainsaw chain?
With each use, a chainsaw will pick up sap and resin from wood and will get gummed up with a mixture of sawdust, dirt and chain lubricant. If you want to get peak performance out of your saw every time, you'll have to make the commitment to keep it clean.
How many times can you sharpen chainsaw chain?
To keep your saw cutting in a straight line, be a fanatic about filing each cutter with the same number of strokes and the same amount of pressure. Cutters can be sharpened up to 10 times or more before the chain needs replacing.
How long should logs dry before sawing?
You should seal the ends within minutes after being cut down; you should not wait hours, and definitely not days! The drying time will vary depending on the wood species and thickness of the logs, but they will take at least one to two years to dry – the longer you can leave them before you start building the better.
Is it better to chop wood wet or dry?
Dry Wood Is Typically Easier to Split
Normally, though, you'll find that dry, seasoned wood is easier to split than wet wood. Regardless of the tree species from which it was harvested, dry wood contains less moisture, so there's less resistance when cutting and splitting it.
How long should a sharp chainsaw last?
So, how long does a chainsaw chain last? A chainsaw chain can last for 5+ years with frequent use. For occasional users, a chain could last for decades.
How do I know if my chainsaw is dull?
Five Signs of a Dull Saw Chain
- The saw chain does not pull itself into the wood. ...
- While doing a split cut or a cross cut (making a vertical cut) the saw chain creates fine sawdust instead of coarse strands.
- Smoke crops up even though the chain lubrication is in working order and the chain tension is correct.